Silicone Tubing

Specifications:

Features:

Excellent solution to fit over longer parts where standard caps are too short (can use with cap if required)
Masking off thru hole, by utilizing the O.D. of silicone tube and pulling it thru
Can be cut to required length. Note that cutting long creates easy pull tab
Conforms to irregularities
Reusable and will not melt or harden
Applications: powder coating, e-coating, plating and anodizing

Part Number	ID In	ID mm	OD In	OD mm	Roll Length ft	Roll Length m
ST0040A	0.040	1.0	0.165	4.2	100	30.48
ST0062A	0.062	1.6	0.187	4.8	100	30.48
ST0080A	0.080	2.0	0.205	5.2	100	30.48
ST0093A	0.093	2.4	0.218	5.6	100	30.48
ST0109A	0.109	2.8	0.234	6.0	100	30.48
ST0125A	0.125	3.2	0.250	6.4	100	30.48
ST0140A	0.140	3.6	0.265	6.8	100	30.48
ST0156A	0.156	4.0	0.281	7.2	100	30.48
ST0172A	0.172	4.4	0.297	7.6	100	30.48
ST0187A	0.187	4.7	0.312	7.9	100	30.48
ST0203A	0.203	5.2	0.328	8.4	100	30.48
ST0218A	0.218	5.5	0.343	8.7	100	30.48
ST0234A	0.234	5.9	0.359	9.1	100	30.48
ST0250A	0.250	6.3	0.375	9.5	100	30.48
ST0281A	0.281	7.1	0.406	10.3	50	15.24
ST0312A	0.312	7.9	0.437	11.1	50	15.24
ST0343A	0.343	8.7	0.468	11.9	50	15.24
ST0375A	0.375	9.5	0.500	12.7	50	15.24
ST0406A	0.406	10.3	0.531	13.5	50	15.24
ST0437A	0.437	11.1	0.562	14.3	50	15.24
ST0500A	0.500	12.7	0.625	15.9	50	15.24
ST0625A	0.625	15.9	0.750	19.1	50	15.24
ST0750A	0.750	19.1	0.875	22.3	50	15.24
ST0875A	0.875	22.2	1.000	25.4	50	15.24
ST0937A	0.937	23.8	1.062	27.0	50	15.24
ST1000A	1.000	25.4	1.125	28.6	50	15.24
ST1125A	1.125	28.6	1.250	31.8	25	7.62
ST1250A	1.250	31.8	1.375	35.0	25	7.62
ST1375A	1.375	34.9	1.500	38.1	25	7.62
ST1500A	1.500	38.1	1.625	41.3	25	7.62
ST1625A	1.625	41.3	1.750	44.5	25	7.62
ST1750A	1.750	44.4	1.875	47.6	25	7.62
ST1875A	1.875	47.6	2.000	50.8	25	7.62
ST2000A	2.000	50.8	2.125	54.0	25	7.62

New to Alliance